How to Save Money With Your Paper Stock
If you like this post, please subscribe to our RSS feed to read our new posts every day.
It’s a tough question to answer, and one I hear all the time: Which paper stock should I choose for my book? And although it’s a tough question, it is an important one because the paper you choose will tell your potential buyer what kind of book this is. Go too cheap, you might lose some buyers to a different title. Go too expensive, you just wasted your money.
Book paper weights are different than the paper weight measurements you will see in an office supply store. A 20# bond that you would find at Staples is similar to a 50# offset at a book printer. A 24# bond is similar to 60# offset, 28# is similar to 70# offset, etc.
Typically, I would recommend that for a standard book with just black text (no color) and not a lot of images, 50# offset is just fine. If there are a lot of graphics in the book, you might want to bump up to 60# offset to eliminate some see-through from one side of the page to the other.
Don’t assume that the 20# bond paper you saw at Office Depot is going to be identical to the 50# offset paper you asked your printer to use. It won’t be. Different paper manufacturers produce their papers with different brightness, different opacity, etc. So always ask for paper samples from your printer.
Now let’s assume your book is not as simple as a novel or a book with just black text. Maybe your book needs to be printed in full color. If that’s the case, you’ll want to use a paper stock that highlights the color better than a typical offset sheet. Glossy paper will usually do the trick.
Most full color books are printed overseas, where a different standard of paper measurement is used - grams per square meter (gsm). To calculate gsm, multiply the offset weight by approximately 1.5. So an 80# gloss sheet in the U.S. would be the same as a 120 gsm sheet overseas. You’ll definitely want a thicker paper stock for your color book versus a black & white book.
Again — always get samples before making your decision!
Always ask for your book covers to include gloss lamination. Standard paperback cover stock is 10 pt. C1S. A C1S cover means that it is coated on one side for durability and to help the colors “pop” a little more. If your book is on the large side, consider bumping up to a 12 pt. cover for extra durability.
